01 · AIR
Maintain Airflow
The right hose, bag and filter setup helps keep extraction performance stable during demanding work.
Accessories & Consumables
Keep your H-Class dust extraction system working the way it should.
Filters, dust bags, hoses, connectors and tool-capture accessories designed to support airflow, containment, maintenance and silica dust control on Australian worksites.
- H-Class filters sized for genuine compliance airflow
- Sealed dust bags for safe silica handling
- Reinforced hoses rated for site abrasion
- Tool-capture shrouds & connectors for source extraction
H-Class Rated·
Genuine Spares·
Australian Worksite Stock·
Compliance-Grade
System Benefits
02 · CLASS
Support H-Class Use
Consumables and accessories should match the system class, dust type and application.
03 · TIME
Reduce Downtime
Keep spare bags, filters and fittings ready before a blocked system slows the job down.
04 · SAFE
Cleaner Handling
Proper dust bags and containment accessories help reduce unnecessary exposure during emptying and maintenance.
Section 03 · System Integrity
A dust extractor is only as strong as the setup connected to it.
A H-Class dust extractor does not work in isolation. The filter, bag, hose, connector, shroud and tool interface all affect how well dust is captured, contained and managed on site.
Using the wrong accessory can reduce airflow, increase blockages, make emptying messier and weaken the overall control measure. Novavac accessories and consumables are selected to help your system keep working as intended.
Section 04 · Browse by Category
Find the right accessory or consumable for your setup.
Start with the parts that affect extraction performance, containment, connection and maintenance.
A · FIL
Cartridge · HEPA
Compliance
Filters
Replacement filtration components for maintaining dust extraction performance and system reliability.
View Filters
B · BAG
Sealed · Single-Use
Silica-Rated
Dust Bags
Dust collection bags designed to support cleaner disposal, safer handling and easier maintenance.
View Dust Bags
C · HSE
Antistatic · Reinforced
Bayonet
Hoses & Connectors
Connection components that help maintain airflow between the extractor, tool and dust source.
View Hoses
E · CAP
Shrouds · Adaptors
Source Capture
Tool Capture Accessories
Accessories that help connect extraction systems to tools, shrouds and work processes where dust is generated.
View Tool Accessories
Section 05 · Essentials
Essential accessories and consumables.
Start with the items most likely to affect system performance, maintenance and dust containment.
Consumables
NV-BAG-01
FIG · 01
Novavac Dust Bags
Replacement dust bags for collecting and containing extracted dust during site work and maintenance.
Compatibility
Compatible with selected Novavac systems.
Filtration
NV-FIL-01
FIG · 02
Replacement Filter
Replacement filtration component for maintaining system performance during regular use.
Compatibility
Check compatibility before ordering.
Hose
NV-HSE-01
FIG · 03
Antistatic Hose
Flexible hose designed to support efficient dust extraction between tool and machine.
Compatibility
Available for compatible Novavac systems.
Connection
NV-CON-01
FIG · 04
Connector Set
Connector components for adapting extraction setups to different tools and site requirements.
Compatibility
Confirm fitment before ordering.
Not sure what fits your system?
Ask for a compatibility check →
Section 06 · Filters & Bags
Filters and dust bags are not optional details.
Filters and dust bags directly affect containment, airflow and maintenance. If they are blocked, damaged, incorrectly fitted or incompatible, the dust extractor may not perform as intended.
Keeping the right consumables on hand helps teams avoid downtime, rushed substitutions and poor dust handling practices.
Replace before performance drops
Waiting until the machine struggles can reduce productivity and increase avoidable dust handling problems.
Use compatible consumables
Bags and filters should match the system they are used with. Guessing is not a strategy.
Keep spares on site
For high-dust work, spare consumables should be treated as part of the job setup.
Section 07 · Source Capture
Dust control starts at the point of generation.
The extractor cannot capture dust that never reaches the hose. Tool connection, shroud fitment, hose diameter and connector quality all affect the amount of dust captured at source.
For cutting, grinding, drilling and surface preparation, the accessory setup should be selected around the task, not just the machine.
Section 08 · Fitment Check
Not every accessory fits every system.
Before ordering accessories or consumables, check the machine model, hose size, tool connection, filter type and intended application.
If you are unsure, contact Novavac before purchasing. The wrong part may fit poorly, reduce airflow or create avoidable downtime.
Section 09 · Maintenance Logic
Build consumables into your maintenance routine.
Accessories and consumables should be reviewed as part of normal site preparation and machine maintenance. High-dust work can use bags, filters and hoses faster than expected, especially during concrete grinding, cutting, chasing and demolition.
| Item | Why it matters | When to check |
|---|---|---|
B · BAGDust bags |
Containment and disposal | Before and after high-dust work |
A · FILFilters |
Airflow and filtration performance | During maintenance or reduced suction |
C · HSEHoses |
Airflow and tool connection | When damaged, crushed or leaking |
D · CONConnectors |
Fitment and dust capture | When changing tools or shrouds |
E · CAPShrouds / tool capture |
Dust control at source | Before cutting, grinding or drilling |
Section 10 · Compatibility Support
Not sure which accessories fit your setup?
Tell us what Novavac system you use, what work you are doing and what tool connection you need. We will help you identify the right consumables and accessories before you order.
Section 11 · FAQ
Accessories & consumables FAQ
The questions Australian site teams ask most often when choosing parts for a Novavac system.
Q1Do I need to use Novavac-compatible consumables?
Yes. Consumables should be compatible with the machine and application. Incorrect filters, bags or fittings can affect airflow, containment and usability.
Q2How often should filters and dust bags be replaced?
It depends on the dust volume, task, machine use and site conditions. High-dust work such as grinding, cutting and chasing may require more frequent checks and replacement.
Q3Can I use any hose with a H-Class dust extractor?
No. Hose diameter, length, condition and connector fit can all affect extraction performance. The hose should suit the machine, tool and work process.
Q4Are accessories part of silica dust compliance?
They can be. A dust extractor relies on the full setup around it, including tool capture, hose connection, filters, bags and maintenance. Accessories should support the control measure, not weaken it.
Q5What should I keep on site as spare consumables?
For high-dust work, keeping spare dust bags, filters and key connectors on site can reduce downtime and prevent rushed substitutions.
Section 12 · Site-Ready
Keep your dust extraction system site-ready.
Order compatible accessories and consumables, or speak with Novavac before choosing parts for your system.
H-Class Rated·
Genuine Spares·
Australian Stock·
Compliance-Grade